My 'shed.'
Re: My 'shed.'
Ill be setting up my Ruixon knife sharpening device on that when it gets here.
- Bobby
- Posts: 18044
- Joined: Thu Feb 23, 2017 8:09 pm
Re: My 'shed.'
I can see one here:
https://www.ebay.com.au/itm/15441296039 ... fcQAvD_BwE
Different stones have different thicknesses -
if you just swap a stone it will sharpen at a different angle.
Unless you have a "slip collar" on your device to allow for different thicknesses
of the progressive stones you'll use - then it won't work properly.
- Gordon
- Posts: 1670
- Joined: Sun Feb 25, 2018 4:16 pm
Re: My 'shed.'
Maybe I misread. Didn't you say you had an engineering degree?Bobby wrote: ↑Fri Jul 16, 2021 6:05 pmI can see one here:
https://www.ebay.com.au/itm/15441296039 ... fcQAvD_BwE
Different stones have different thicknesses -
if you just swap a stone it will sharpen at a different angle.
Unless you have a "slip collar" on your device to allow for different thicknesses
of the progressive stones you'll use - then it won't work properly.
On that device, the stone does not control the angle. The stone, whichever one you use, is totally/completely static concerning angle. The angle is created by that slender arm which moves inside a ball joint type of thing.
https://www.youtube.com/watch?v=ogFVA-WhEgo&t=928s
- Bobby
- Posts: 18044
- Joined: Thu Feb 23, 2017 8:09 pm
Re: My 'shed.'
Aussie wrote: ↑Fri Jul 16, 2021 6:42 pm
Maybe I misread. Didn't you say you had an engineering degree?
On that device, the stone does not control the angle. The stone, whichever one you use, is totally/completely static concerning angle. The angle is created by that slender arm which moves inside a ball joint type of thing.
https://www.youtube.com/watch?v=ogFVA-WhEgo&t=928s
You start with one stone which you accept as your wanted angle.
Then when you change to another stone of a different thickness the angle will change.
- Bobby
- Posts: 18044
- Joined: Thu Feb 23, 2017 8:09 pm
Re: My 'shed.'
Aussie,
it's all explained here:
How To: Using the Edge Pro Drill Collar
27,389 views
Dec 16, 2011
The drill collar allows the user to pretty much instantly adjust for the difference in the thickness of each stone. Without the drill collar the user would need to manually adjust the angle arm which is difficult and time consuming. This method is fast and takes all of the guess work out of it.
https://www.bladeforums.com/threads/edg ... r.1702513/
it's all explained here:
How To: Using the Edge Pro Drill Collar
27,389 views
Dec 16, 2011
The drill collar allows the user to pretty much instantly adjust for the difference in the thickness of each stone. Without the drill collar the user would need to manually adjust the angle arm which is difficult and time consuming. This method is fast and takes all of the guess work out of it.
https://www.bladeforums.com/threads/edg ... r.1702513/
-
- Posts: 3457
- Joined: Tue Jun 16, 2015 4:05 pm
Re: My 'shed.'
engineering degree my arse
Re: My 'shed.'
Okay.....that makes sense. Hmmmm....
Maybe I have bought the wrong device but the Ruixin is touted as the best.
Maybe I have bought the wrong device but the Ruixin is touted as the best.
Re: My 'shed.'
Yes......he did side step that. But he is right on the point he was making......by millimeters.
Last edited by Aussie on Fri Jul 16, 2021 7:45 pm, edited 1 time in total.
- Bobby
- Posts: 18044
- Joined: Thu Feb 23, 2017 8:09 pm
Re: My 'shed.'
Proof that Smith is retarded.
https://www.ozpolitic.com/forum/YaBB.pl ... 0764/60#73
Smith
Re: Oil tankers attacked.
Reply #66 - Jun 15th, 2019 at 7:05pm
ten cents is .10c ... one cent is .01c
there was nothing wrong with what I wrote.
Who is online
Users browsing this forum: No registered users and 9 guests