My 'shed.'

[Aussie]

Ill be setting up my Ruixon knife sharpening device on that when it gets here.

[Bobby]

Ill be setting up my Ruixon knife sharpening device on that when it gets here.

I can see one here:
https://www.ebay.com.au/itm/15441296039 ... fcQAvD_BwE



Different stones have different thicknesses -
if you just swap a stone it will sharpen at a different angle.

Unless you have a "slip collar" on your device to allow for different thicknesses
of the progressive stones you'll use - then it won't work properly.

[Gordon]

Shelf down....

Give it some of your blue pills

[Aussie]

Ill be setting up my Ruixon knife sharpening device on that when it gets here.

I can see one here:
https://www.ebay.com.au/itm/15441296039 ... fcQAvD_BwE



Different stones have different thicknesses -
if you just swap a stone it will sharpen at a different angle.

Unless you have a "slip collar" on your device to allow for different thicknesses
of the progressive stones you'll use - then it won't work properly.

Maybe I misread. Didn't you say you had an engineering degree?

On that device, the stone does not control the angle. The stone, whichever one you use, is totally/completely static concerning angle. The angle is created by that slender arm which moves inside a ball joint type of thing.

https://www.youtube.com/watch?v=ogFVA-WhEgo&t=928s

[Bobby]

Maybe I misread. Didn't you say you had an engineering degree?

On that device, the stone does not control the angle. The stone, whichever one you use, is totally/completely static concerning angle. The angle is created by that slender arm which moves inside a ball joint type of thing.

https://www.youtube.com/watch?v=ogFVA-WhEgo&t=928s

You start with one stone which you accept as your wanted angle.
Then when you change to another stone of a different thickness the angle will change.

[Bobby]

Aussie,
it's all explained here:
How To: Using the Edge Pro Drill Collar
27,389 views
Dec 16, 2011
The drill collar allows the user to pretty much instantly adjust for the difference in the thickness of each stone. Without the drill collar the user would need to manually adjust the angle arm which is difficult and time consuming. This method is fast and takes all of the guess work out of it.






https://www.bladeforums.com/threads/edg ... r.1702513/

[J o h n S m i t h]

engineering degree my arse

[Aussie]

Okay.....that makes sense. Hmmmm....


Maybe I have bought the wrong device but the Ruixin is touted as the best.

[Aussie]

engineering degree my arse

Yes......he did side step that. But he is right on the point he was making......by millimeters.

[Bobby]

engineering degree my arse

Proof that Smith is retarded.

https://www.ozpolitic.com/forum/YaBB.pl ... 0764/60#73
Smith
Re: Oil tankers attacked.
Reply #66 - Jun 15th, 2019 at 7:05pm

ten cents is .10c ... one cent is .01c

there was nothing wrong with what I wrote.