Storage-Batteries and Supercapacitors

[Wayne]

Thank You Yog!, You cannot disprove anything I have said because you KNOW you are a technology THIEF!

Is that right fluffy bunny?

Well if that's the case, then you should be able to google up something resembling my design.

So off you go. Go find a combined motor and generator with no electrical or mechanical input that relies on magnetic repulsion alone to obtain both kinetic and electrical output.

Should be quite a challenge since none exist yet.

And when you fail, I will have disproved EVERYTHING you've claimed, just by default.

Tell you what. Go and find a 1st year electrical book about voltage, current, resistance and magnetism and get back to me. Read up on Lenz's laws (for force, flux, flow) and the grip rules relation to magnetic field direction in current carrying conductors. Read up on magnetic properties in natural magnetic properties. Then, come back and talk with me. I have already blown most of your crap out the window. Also, read up on the fallacy of perpetual motion, energy transfer and losses. For a start, the input power to your motor (whatever that may be) will always be greater than the output of the generator. As load increase on the Genny, input to the motor must also increase. There are things like I2R loses in energy transmission you haven't even written about.

Get back to me when you can discuss basic electrical rotating machinery with me - I can't be bothered dealing with an idiot.

[Outlaw Yogi]

Tell you what. Go and find a 1st year electrical book about voltage, current, resistance and magnetism and get back to me. Read up on Lenz's laws (for force, flux, flow) and the grip rules relation to magnetic field direction in current carrying conductors.

No I'll tell you what. You go copulate yourself. You've made unsubstantiated allegations based on nothing, because you apparently can't comprehend using magnetic repulsion alone as the energy source, and now fail to find the device or method you claim I "stole".
The closest apparatus using the same method (but doesn't generate electrical or kinetic output to be exploited) as my design is/are Heron of Alexandria's floating statues. The bullet train and Mag-Lev turbines use magnetic repulsion to eliminate friction. I'll be using standard roller bearings, which will probably be its weakness - as in 1st part to fail/wear out.
As for rules? .. I like to test them and see what can be bent.

Read up on magnetic properties in natural magnetic properties. Then, come back and talk with me.

See this is part of your problem, you think because you read something you know what you're on about, and in your last post even claimed to have written texts on it. Well even if that were true, all you have done is plagiarise or paraphrase others work. Thus you are the "thief".
Y'see you're stuck on theory, like the particle physicist who claimed "volts are not a measure of electricity" which if you're as expert as you imagine would know is absurd. And those stuck on theory generally have no genuine experience, and the fact you claimed to have written texts on the subject matter tells me you have made no discoveries and invented nothing.

So it seems inventiveness must be genetically inherited. My father (now a millionaire) built the largest metal spinning company in Oz, and one of the factors that made him successful in that industry is he invented some of the tools now used in it. Quite simple devices really. For example when a spinning is spun is has an uneven edge so is trimed/skimmed. For decades everyone used hand skimmers and they can be quite dangerous. My father invented skimmers that bolt onto the bed of the lathe. Aide from being safer, they give a uniform result.

In the mid 90s I had a mag wheel repair business. Existing wheel repair tools and contraptions were for steel wheels and not suitable for Magnesium-Aluminium castings or spinnings. So I invented my own tools. I'm the only person in Oz who can repair speedway wheels because I built the device to do it.

When I build my magnetic repulsion motor & generator (requiring no external energy input whatsoever) and eventually have it patented (will register design 1st to prove its effectiveness) I expect some big company like GE to make me a billionaire.
So wayne when you see the 'Heron motor-generator' being used or sold, just remember you told the inventor of it he stole the idea.

I have already blown most of your crap out the window.

I digress, I reckon you've just blown a trumpet with your arse.

Also, read up on the fallacy of perpetual motion,

The fact you had to look it up, suggests you've been bullshitting about everything, and all your so called expert opinion is exactly as I suspected - googled up.
Now it may be a fallacy, although Leonardo Da Vinci had a differing view.
But that's beside the point anyway, because I don't refer to or even consider my contraption a perpetual motion device.
I refer to it and regard it as a magnetic repulsion device.

energy transfer and losses.

And here again I see you had to research it. Well I've already got a fair bit of experience with friction, transfer and atrophy, so if you had to look it up, there's nothing you can tell me.

For a start, the input power to your motor (whatever that may be) will always be greater than the output of the generator.

Correct, but obvious. You could probably get that out of a pretty average dictionary or encyclopedia

As load increase on the Genny, input to the motor must also increase. There are things like I2R loses in energy transmission you haven't even written about.

Irrelevant!

Get back to me when you can discuss basic electrical rotating machinery with me - I can't be bothered dealing with an idiot.

I'm not particularly interested in discussing a topic with a pretend/fake expert.

See this 2.3Kw generator/welder?

Feb17#109 @25%.jpg

Got it for some work recently. The motor runs, but the 10amp sockets aren't. Cleaning up some welding leads to see if the 60amp welder works.
If it works, great, if not I'll fix it and the 10amp too.

So you go read your googled up info and I'll do the real thing.

[Wayne]

Tell you what. Go and find a 1st year electrical book about voltage, current, resistance and magnetism and get back to me. Read up on Lenz's laws (for force, flux, flow) and the grip rules relation to magnetic field direction in current carrying conductors.

No I'll tell you what. You go copulate yourself. You've made unsubstantiated allegations based on nothing, because you apparently can't comprehend using magnetic repulsion alone as the energy source, and now fail to find the device or method you claim I "stole".
The closest apparatus using the same method (but doesn't generate electrical or kinetic output to be exploited) as my design is/are Heron of Alexandria's floating statues. The bullet train and Mag-Lev turbines use magnetic repulsion to eliminate friction. I'll be using standard roller bearings, which will probably be its weakness - as in 1st part to fail/wear out.
As for rules? .. I like to test them and see what can be bent.

Read up on magnetic properties in natural magnetic properties. Then, come back and talk with me.

See this is part of your problem, you think because you read something you know what you're on about, and in your last post even claimed to have written texts on it. Well even if that were true, all you have done is plagiarise or paraphrase others work. Thus you are the "thief".
Y'see you're stuck on theory, like the particle physicist who claimed "volts are not a measure of electricity" which if you're as expert as you imagine would know is absurd. And those stuck on theory generally have no genuine experience, and the fact you claimed to have written texts on the subject matter tells me you have made no discoveries and invented nothing.

So it seems inventiveness must be genetically inherited. My father (now a millionaire) built the largest metal spinning company in Oz, and one of the factors that made him successful in that industry is he invented some of the tools now used in it. Quite simple devices really. For example when a spinning is spun is has an uneven edge so is trimed/skimmed. For decades everyone used hand skimmers and they can be quite dangerous. My father invented skimmers that bolt onto the bed of the lathe. Aide from being safer, they give a uniform result.

In the mid 90s I had a mag wheel repair business. Existing wheel repair tools and contraptions were for steel wheels and not suitable for Magnesium-Aluminium castings or spinnings. So I invented my own tools. I'm the only person in Oz who can repair speedway wheels because I built the device to do it.

When I build my magnetic repulsion motor & generator (requiring no external energy input whatsoever) and eventually have it patented (will register design 1st to prove its effectiveness) I expect some big company like GE to make me a billionaire.
So wayne when you see the 'Heron motor-generator' being used or sold, just remember you told the inventor of it he stole the idea.

I have already blown most of your crap out the window.

I digress, I reckon you've just blown a trumpet with your arse.

Also, read up on the fallacy of perpetual motion,

The fact you had to look it up, suggests you've been bullshitting about everything, and all your so called expert opinion is exactly as I suspected - googled up.
Now it may be a fallacy, although Leonardo Da Vinci had a differing view.
But that's beside the point anyway, because I don't refer to or even consider my contraption a perpetual motion device.
I refer to it and regard it as a magnetic repulsion device.

energy transfer and losses.

And here again I see you had to research it. Well I've already got a fair bit of experience with friction, transfer and atrophy, so if you had to look it up, there's nothing you can tell me.

For a start, the input power to your motor (whatever that may be) will always be greater than the output of the generator.

Correct, but obvious. You could probably get that out of a pretty average dictionary or encyclopedia

As load increase on the Genny, input to the motor must also increase. There are things like I2R loses in energy transmission you haven't even written about.

Irrelevant!

Get back to me when you can discuss basic electrical rotating machinery with me - I can't be bothered dealing with an idiot.

I'm not particularly interested in discussing a topic with a pretend/fake expert.

See this 2.3Kw generator/welder?

Feb17#109 @25%.jpg

Got it for some work recently. The motor runs, but the 10amp sockets aren't. Cleaning up some welding leads to see if the 60amp welder works.
If it works, great, if not I'll fix it and the 10amp too.

So you go read your googled up info and I'll do the real thing.

Thanks for the rant Yogi - as I said run away and read up on all the things I have suggested you read up on, using the text books I have recommended - then come back and discuss, All you are doing is wavering from sentence to sentence and writing shit.

[IQS.RLOW]

At least he's keeping to your conversation style.

[Outlaw Yogi]

then come back and discuss,

Nothing to discuss. I mentioned an idea I had a very long time ago and intend for it to be a future project (got lots of unfinished projects), and you've tried to poo poo it by googling up material on completely different concepts (eg Laithwaite's Linear motor) and claim to be an expert in the field to boot.

All you are doing is wavering from sentence to sentence and writing shit.

If you say so Mugsly, but I reckon you're the one posting ignorant shit.

See this photo? ... I took it specially for you, because I expected you to post more shit ...

Feb17#111 @25%.jpg

For most of 2010 to 2016 I've lived without electricity ... no fridge, no telly and certainly no air con.
A couple of short periods I used PV panels the charge old truck or car batteries to run LED lights, but cheap arse 12v items don't last long. In 2015 I had a junky pretend pig hunter fuck all my batteries. I told him they're on wooden blocks for a reason "Don't put them on the floor" .. and the arsewipe put them outside (of donga).

Last year I got a 600w Kawasaki generator from the scrap yard for $20. The needle and seat plus the jet in the carby were gummed up, so I got it running easily and would charge my laptop to check my surveillance and hunting cameras. Then it became hard to start and backfired. That suggests burnt exhaust valve, and fucked it I'm going to chase around for a valve for a $20 genny.

Several days ago I acquired a 3.75kva Honda genny and stuck it in a dog kennel til I could check it out properly.
Today, after obtaining some steel 30' roof trusses and corrugated iron for a shed (another project) I took the Honda genny in to a shady spot.

The boat petrol tank was rooted, the jet blocked and the needle and seat gummed up.
But fortunately I'm a scrap cannibal, so cannibalised the Kawasaki to get the Honda going, and now I have electrickery again.

Y'see wayne I'm a Jack of all shit kicking and don't pretend to be anything more.
You claim to be an expert on matters electrical, but an ex is a has been and a spurt is a drip under pressure, and I wouldn't trust you to wire up a basic light switch. End of story.

[Outlaw Yogi]

Forgot a bit/paragraph >

The reason I don't care what others think of me is because doing so wouldn't improve anything. If anything it'd just cause anxiety, so the only opinion that matters is mine.